Filter
Top Products
5.0 FEATURES
30
straps to be even with or just below your
child’s shoulders. (Fig. 30-1) The harness
straps are adjusted as follows:
1. Remove the Safety Seat from the Base and
rotate the Carry Handle to the back position.
Place your child in the Safety Seat such that
your child’s bottom is all the way to the rear
and bottom of the seat.
2. Determine which pair of slots will position the
harness straps even with or just below your
child’s shoulders. DO NOT use harness
slots that will position the harness straps
above your child’s shoulders as the harness
straps in this position will not restrain a small
child in a sharp turn, sudden stop or crash.
3. If the Harness Straps require adjustment,
remove your child from the Safety Seat.
Rotate the handle to the upright carry
position.
4. Loosen the harness straps by depressing the
Harness Adjuster Button located below the
ap just ahead of the Harness Buckle and
pulling on the harness straps.
5. Turn the seat over. Locate the Belt Adjuster
Plate near the bottom of the seat. (Fig. 30-2)
Remove both Harness Straps from the Belt
A
A
B
B
Fig. 30-1
Fig. 30-2
Proper height is even or
just below shoulder