Filter
Top Products
45
7.0 INSTALLATION
place. Check that there is no slack in the
webbing on both sides of the base and
that the base is tightly installed. Fig. 45-2
and 45-3.
6.
Check that nothing is on top of the base or
anything that will interfere with the proper
latching of the Safety Seat to the Base. Place
the Safety Seat onto the Base and push down
until the Safety Seat latches securely to the
Base and you hear a click. Pull upward on
the Safety Seat to check that the Safety Seat
is securely latched onto the base. (Fig. 25-1)
If the Safety Seat does not securely latch
onto the Base, the Safety Seat will provide
No Protection for your child. DO NOT use
the Safety Seat with the Base if it does not
securely latch onto the Base. Please call
Baby Trend at 1-800-328-7363 for assistance.
7. To remove the base from the vehicle,
squeeze the webbing release button
on the LATCH connector to loosen the
webbing. (Fig. 46-1a) Please note
that the LATCH connector can not be
released from the LATCH anchor if the
webbing is tight. Press the LATCH
hook release button on each
connector to release the connector
from the anchor. (Fig. 46-1b)
Fig. 45-1
Fig. 45-2
Fig. 45-3
Snap onto anchors