Filter
Top Products
Preparation and Unpacking 2-9
Installing the PathBuilder S24x, 26x, and 27x Switch in an Equipment Rack
6 Remove the long (#6) screws.
Then, slide the PathBuilder S24x,
26x, and 27x switch flush against
the rear flange of the Mounting
Shelf and reinsert the screws
through the flange and into the
unit’s case.
The PathBuilder S24x, 26x, and
27x switch is now securely
attached to the equipment rack and
ready for connection to devices and
power.
N
o
t
e
The unit is now accessible mainly
from the front and will require
complete removal from the rack to
perform maintenance routines.
Step Action Description