3Com S26x Crib Toy User Manual


 
5-20 Channelized Data
Configuring Channelized Data
Configuring Virtual Port Mapping Table
Introduction A T1 or E1 digital port comprises multiple logical data channels. These channels,
known as virtual ports, are not associated with any physical slot number and have no
physical I/O of their own.
Before You Begin Obtain the timeslot assignments for all the remote nodes connecting to the
PathBuilder S24x, 26x, and 27x switch from your network services provider. You
need this information to complete the virtual ports configuration.
Function By configuring the Virtual Port Mapping Table, a timeslot channel on a specific T1
or E1 line is mapped to a virtual port. Virtual ports are numbered from 100 to 254,
whereas ports with actual physical connections are numbered from 1 to 54.
Configuration
Guidelines
The Virtual Port Mapping Table must be configured in conjunction with other
records as follows.
Configure the physical port record as either T1 or E1 and all virtual ports
before you configure the Virtual Port Mapping Table.
Configure a Virtual Port Mapping Record to assign a timeslot number per
T1/E1 channel for the application.
What You See Figure 5-4 shows the Virtual Port Mapping Table.
Figure 5-4. Virtual Port Mapping Table
Virtual Port Number
Port Type
T1/E1 Port Number
Timeslot Number
DS0Rate
Node: nodename Address: (blank) Date: ___________Time:__________
Menu: Configure Path: (Main.6)
1. Node
20. Virtual Port Mapping Table