3Com S26x Crib Toy User Manual


 
1-8 About the PathBuilder S24x, 26x, and 27x switch
Hardware Components
Hardware Components
PathBuilder S24x,
26x, and 27x
Switch Hardware
Configuration
The PathBuilder S24x, 26x, and 27x switch comes in a rack-mountable
configuration.
The switch contains a motherboard/CPU board, a built-in power supply, and an ISA
bus for up to eight additional interface cards. The PathBuilder S24x, 26x, and 27x
switch has three available serial ports, an Ethernet port, and a CTP port, FLASH
memory, and battery-powered configuration backup. It is easily expanded by adding
option cards to the industry standard ISA bus.
Figure 1-6 shows a rack-mountable PathBuilder S24x, 26x, and 27x switch.
Figure 1-6. PathBuilder S24x, 26x, and 27x Switch
POWER
STATUS
SERVICE
RESET
Numeric
LED
Status
LEDs
SSN
Label
Reset
Button
Product
ID Label
Power
Supply
115/230 VAC
Voltage
Select
Switch
Serial/Network
I/O Ports 1, 2, 3, 6
Product ID
Label
Front View
Rear View
Optional -48V
Power Supply
AUI Port 4
(Ethernet Routing)
Expansion
Card Ports
Slots 1 through 8
®
PathBuilder
S200 Series