4-25
1
2
3
4
5
6
7
8
9
10
11
NOTICE
ECB00090
Never turn an adjusting mechanism beyond
the minimum and maximum settings.
TIP
●
Make sure that the position indicator marks are
aligned when the shock absorber assembly is
set to the standard setting(s).
●
Although the total number of clicks of a damping
force adjusting mechanism may not exactly
match the above specifications due to small dif-
ferences in production, the actual number of
clicks always represents the entire adjusting
range. To obtain a precise adjustment, it would
be advisable to check the number of clicks of
each damping force adjusting mechanism and
to modify the specifications as necessary.
EWB00370
EBU29400
Handlebar position
The handlebar can be adjusted to one of four posi-
tions to suit the rider’s preference. Have a Yamaha
dealer adjust the position of the handlebar.
Compression damping setting (for slow com-
pression damping):
Minimum (soft):
18 click(s) in direction (b)*
Standard:
8 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned in di-
rection (a)
WARNING
POTENTIAL HAZARD
Suspension components become hot during
operation.
WHAT CAN HAPPEN
You could be burned.
HOW TO AVOID THE HAZARD
Never touch the compression damping force
adjusting screw, rebound damping force ad-
justing screw or oil reservoir with your bare
hand or skin until suspension components
have cooled.
