A SERVICE OF

logo

Open as PDF
next previous
8-21
1
2
3
4
5
6
7
8
9
10
11
EBU23551
To change the coolant
EWB01880
1. Place the ATV on a level surface.
2. Remove panel F. (See page 8-8.)
3. Place a container under the engine, and then
remove the coolant drain bolt. (Use a trough
or a similar object as shown.)
4. Remove the radiator cap.
WARNING
POTENTIAL HAZARD
Removing the radiator cap when the engine
and radiator are still hot.
WHAT CAN HAPPEN
You could be burned by hot fluid and steam
blown out under pressure.
HOW TO AVOID THE HAZARD
Wait for the engine to cool before removing
the radiator cap. Always place a thick rag
over the cap. Allow any remaining pressure
to escape before completely removing the
cap.
1. Coolant drain bolt
2. Trough
1. Radiator cap
1
2
1