4-23
1
2
3
4
5
6
7
8
9
10
11
rebound damping force and thereby soften the
damping.
TIP
Make sure that the position indicator marks are
aligned when the shock absorber assembly is set
to the standard setting.
Compression damping force
Panels A and D need to be removed to make this
adjustment. (See page 8-8.)
Compression damping force (for fast compression
damping)
To increase the compression damping force and
thereby harden the compression damping, turn the
adjusting bolt in direction (a). To decrease the
compression damping force and thereby soften
the compression damping, turn the adjusting bolt
in direction (b).
1. Position indicator marks
2. Rebound damping force adjusting screw
Rebound damping setting:
Minimum (soft):
20 turn(s) out from the fully turned in posi-
tion
Standard:
11 turn(s) out from the fully turned in posi-
tion
Maximum (hard):
1 turn(s) out from the fully turned in position
1
2
(a)
(b)
