31
Data - Basic Settings Screen
Operation
Wireless Mode
Select the desired option:
· Disable - select this if for some reason you do not want this
AP to transmit or receive at all.
· 802.11b and 802.11g - this is the default setting, and will
allow connections by both 802.11b and 802.1g wireless sta-
tions.
· 802.11b - if selected, only 802.11b clients are allowed.
802.11g wireless stations will only be able to connect if they
are fully backward compatible with the 802.11b standard.
· 802.11g - only 802.11g clients are allowed. If you only have
802.11g, selecting this option may provide a performance
improvement over using the default setting.
· Dynamic Super 802.11g (108Mbps) - This uses Packet
Bursting, FastFrame, Compression, and Channel Bonding
(using 2 channels) to increase throughput. Only clients sup-
porting the "Atheros Super G" mode can connect at
108Mbps, and they will only use this speed when necessary.
However, this option is backward compatible with 802.11b
and (standard) 802.11g.
· Static Super 802.11g (108Mbps) - This uses Packet Burst-
ing, FastFrame, Compression, and Channel Bonding (using
2 channels) to increase throughput.
Because "Channel Bonding" is always used, this method is
NOT compatible with 802.11b and (standard) 802.11g. Only
clients supporting the "Atheros Super G" mode can connect
at 108Mbps; they will always connect at this speed. Select
this option only if all wireless stations support this "Atheros
Super G" mode.
