14
802.11b/g Bridge
Mode
Select the primary profile for 802.11b and 802.11g Bridge
Mode. This setting determines the SSID and security settings
used for the Bridge connection to the remote AP.
Isolation
None
If this option is selected, wireless clients using different pro-
files (different SSIDs) are not isolated, so they will be able to
communicate with each other.
Isolate all
If this option is selected, wireless clients using different pro-
files (different SSIDs) are isolated from each other, so they
will NOT be able to communicate. They will still be able to
communicate with other clients using the same profile, unless
the "Wireless Separation" setting on the "Advanced" screen
has been enabled.
Use VLAN
This option is only useful if the hubs/switches on your LAN
support the VLAN (802.1Q) standard.
When VLAN is used, you must select the desired VLAN for
each security profile when configuring the profile. (If VLAN is
not selected, the VLAN setting for each profile is ignored.)
Click the Configure VLAN button to configure the IDs used by
each VLAN. See below for further details.
3.5.1 VLAN Configuration Screen
This screen is accessed via the Configure VLAN button on the Security Profiles screen.
· The settings on this screen will be ignored unless the Use VLAN option on the
Security Profiles screen is selected.
· If using the VLAN option, these setting determine which VLAN traffic is assigned to.
