26
WPA Encryption
Select the desired option. Other Wireless Stations must use
the same method.
· TKIP - Unicast (point-to-point) transmissions are en-
crypted using TKIP, and multicast (broadcast)
transmissions are not encrypted.
· TKIP + 64 bit WEP - Unicast (point-to-point) transmis-
sions are encrypted using TKIP, and multicast
(broadcast) transmissions are encrypted using 64 bit
WEP.
· TKIP + 128 bit WEP - Unicast (point-to-point) transmis-
sions are encrypted using TKIP, and multicast
(broadcast) transmissions are encrypted using 128 bit
WEP.
· AES - CCMP - CCMP is the most common sub-type of
AES (Advanced Encryption System). Most systems will
simply say "AES". If selected, both Unicast (point-to-point)
and multicast (broadcast) transmissions are encrypted
using AES.
· AES - TKIP - If selected, Unicast (point-to-point) uses
AES-CCMP and multicast (broadcast) transmissions are
encrypted using TKIP.
Group Key Update
This refers to the key used for broadcast transmissions.
Enable this if you want the keys to be updated regularly.
Key Lifetime
This field determines how often the Group key is dynamically
updated. Enter the desired value.
Update Group key
when any mem-
bership
terminates
If enabled, the Group key will be updated whenever any
member leaves the group or disassociates from the WAP-
4060PE.
Radius Account-
ing
Enable this if you want this WAP-4060PE to send accounting
data to the Radius Server.
If enabled, the port used by your Radius Server must be
entered in the “Radius Accounting Port" field.
Update Report
every ...
If Radius accounting is enabled, you can enable this and
enter the desired update interval. This WAP-4060PE will then
send updates according to the specified time period.
Radius MAC
Authentication
The current status is displayed. This will always be "Dis-
abled", because Radius MAC Authentication is not available
with WPA-802.1x. The Configure button for this feature will
also be disabled.
UAM
The current status is displayed. This will always be "Dis-
abled", because UAM is not available with WPA-802.1x. The
Configure button for this feature will also be disabled.
