Troubleshooting
63
• Refresh of live images is unstable
• Browser disconnection occurs
• Network performance is poor
• Downloaded image is not displayed
correctly
• The image is not displayed,
recorded, or played back correctly.
If the cameras use different compression formats, the performance may be
poor (image update is unstable).
−
The settings may exceed the performance limit of network cable or the
recorder's network.
Lower the value/rate related to network performance, such as the live
transmission rate and the recording rate.
Setup
Instructions
(PDF file)
The recorder and the HUB network speed may not match (100BASE- TX
Full and 100BASE-TX Half, for example). A HUB may cause variations in
network transmission speeds.
Set the HUB's transmission speed and the recorder's network transmission
speed to the same speed.
−
Cannot operate camera
Make sure that the number of the camera set in [NW camera] on the setup
menu is correct.
Setup
Instructions
(PDF file)
Make sure that the user name and password in [NW camera] on the setup
menu have been input.
Setup
Instructions
(PDF file)
Problem Check item/remedy Page
