User management
68
Use the following procedure to configure settings to assign recorder administrator privileges to a user (administrator).
The administrator name and password can be changed, and the operation level and other operation privileges can be configured.
1 Click the [User mng.] button on the setup menu.
2 On the sub-menu that appears, click [Administrator].
This will display the "Administrator Settings" window.
3 Configure the settings for each item.
Refer to “Administrator settings” table for details about the
settings.
4 Click the [Set] button.
Administrator settings
♦Initial default
Administrator
Important:
• Administrator settings can be configured only by a user who is logged in as an administrator.
• If you do not change the administrator password, a prompt to change the password will appear on the display after log in.
Item Settings Description
Administrator name Name input
(ADMIN♦)
Change the administrator name here.
• Enter between 5 and 14 single-byte alphanumeric
characters.
New password
Retype new password
Enter password
(Blank♦)
Enters the password.
• Enter between 5 and 8 single-byte alphanumeric characters.
• Use a password that is not easily guessable by another
person. Also, take care that you do not forget the password.
• To ensure security, change passwords periodically.
Level LV1♦ Shows the user level. The level of the administrator is [LV1],
which cannot be changed.
• For operations that can be performed at each level, refer to
"User level (page 73)".
Access priority 0♦ Shows the priority sequence for operations when multiple users
are logged in on the recorder at the same time. The access
priority of the administrator is [0] (highest), which cannot be
changed.
Default screen [Cam.1]♦ to [Cam.64] / [Cam.1-4]
/ [Cam.5-8] / to / [Cam.61-64] /
[Seq]
Specifies the live image displayed immediately after log in.
• [Selecting [Cam.1] to [Cam.64] displays the images of the
selected cameras on a 1-image screen.
• Selecting [Cam.1-4] to [Cam.61-64] displays the live images
of the selected cameras on a 4-image screen.
• Selecting [Seq] displays images in a specified sequence.
Camera partitioning [View/Operate]♦ Shows the scope of control for each camera channel. The
scope of the administrator is [View/Operate], which cannot be
changed.
