About operating windows
25
1 Display the top page and access the recorder.
2 Click the [Setup] button.
The Setup menu button is displayed.
3 Click the setup menu button to configure.
The sub menu tab of the selected setup menu is displayed.
4 Click the sub menu tab to configure.
The settings for the selected sub menu on the window is
displayed.
5 Configure the settings for each item.
6 Click the [Set] button after configuring the settings.
The settings are reflected on the recorder.
• The changes are canceled if you move to another page
without clicking the [Set] button.
Basic operations
Important:
• Activating the settings forcibly logs out any other users
currently logged in to the recorder.
• Changing the user management settings forcibly logs out all
users.
• Recording may not be possible for about four seconds
immediately after the settings are saved.
• The setup menu can be used by only one user. The setup
menu does not open if another user is using it.
• If you click on the [x] to close the web browser while moving to
the setup menu, the setup menu cannot be accessed for
about 90 seconds. If you click on the setup menu button, a
message appears indicating another user is configuring
settings.
