A SERVICE OF

logo

Open as PDF
next previous
NOTE: This is for display only, no configuration is possible with this command.
Example B-4 CP Command
DATE Command
DATE Command - Set Date and Time.
• Access level—Administrator
• Scope—Complex
This command changes the value of the real time clock chip on the MP.
Example B-5 DATE Command
DC Command
DC - Default Configuration
• Access level—Administratrix
• Scope—Complex
This command resets some or all of the configuration parameters to their default values.
NOTE: The clock setting is not effected by the DC command.
The following example shows the various parameters and their defaults.
152 Management Processor Commands