Appendix A Functions Provided by the PRIMEQUEST 2000 Series
A.1.3 Monitoring and reporting functions
201
Power recovery processing
Power-on control when power is restored from AC
Lost
Boot device selection in Web-UI
Diagnosis mode selection at boot
Boot device selection by UEFI Boot Manager, boot
option setting
Automatic power-on/off at specified date and time
specification
recovery
Automatic degraded operation on CPU, DIMM, SB,
etc
SB automatic switching from faulty SB to Reserved
SB
Automatic restart of partition when failure occurs
operation
Processing takeover between duplicate MMBs
Recovery by MMB or BMC reset, continuous partition
operation
operation
Power consumption
management
Cabinet power consumption monitoring, notification to
higher-level software
PSU power-on count control
PSU power-on control only as needed
Optimum control of FAN speed
Reconfiguration
The configuration change is possible compared with
the partition OS's operating.
A.1.3 Monitoring and reporting functions
TABLE A.3 Monitoring and reporting functions
monitoring and
reporting
Hardware problem
monitoring
Hardware problem monitoring by MMB/BMC/UEFI
monitoring
Watchdog Timer monitoring by MMB/UEFI
Power control problem
monitoring
Power control sequence problem monitoring
monitoring
Fan speed problem monitoring
Voltage problem
monitoring
Voltage problem monitoring
Temperature problem
monitoring
Temperature problem monitoring
monitoring
Proactive monitoring of CPU, DIMM, and HDD
hardware failures
External reporting by e-mail, SNMP, or REMCS
Sensor-detected event monitoring
Threshold monitoring of temperature, power voltage,
and fan speed
Display of MMB and system status
Location display (Location LED)
Eco-related status display
Cabinet power consumption display
PSU/DDC power-on status display
Eco status acquisition from higher-level software
