A SERVICE OF

logo

Open as PDF
next previous
5-11
CrossPoint / MAV Matrix Switchers • Matrix Software
User Password field
TheUserPasswordelddisplaysthepasswordrequiredtologontothe
CrossPointorMAVswitcherviatheLANportasauser,withoutallofthe
administrator’srightsandprivileges.Passwordsarecasesensitiveandarelimited
to 12 upper-case and lower-case alphanumeric characters.
While you are logged on as a user, this field is masked with asterisks (************) as
a security measure.
N
An administrator password must be created before a user password can be
created.
N
The following characters are invalid in passwords:
{space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
Edit this field as follows:
1. ClickintheUserPasswordeld.Thegraphiccursorbecomesatextcursor.
2. Edit the case-sensitive password as desired.
3. PresstheTabkeyonthekeyboardorclickinanothereldtoexittheUser
Passwordeld.
4. Click the Take button to make the password change take effect.
Mail Server IP Address field
TheMailServerIPAddresselddisplaystheIPaddressofthemailserverthat
handlesthee-mailforthefacilityinwhichtheCrossPointorMAVswitcheris
installed.
ValidIPaddressesconsistoffour1-,2-,or3-digitnumericoctetsseparatedbydots
(periods).Eacheldcanbenumberedfrom000through255.Leadingzeroes,upto
threedigitstotalpereld,areoptional.Valuesof256andaboveareinvalid.
Edit this field as follows:
1. ClickintheMailServerIPAddresseld.Thegraphiccursorbecomesatext
cursor.
2. EdittheIPaddressasdesired.
3. PresstheTabkeyonthekeyboardorclickinanothereldtoexittheMail
ServerIPAddresseld.
4. Click the Take button to make the address change take effect.
Mail Server Domain Name field
TheMailServerDomainNameelddisplaysthedomainnamethatthe
CrossPointorMAVswitcherusestologontothee-mailserver.Standarddomain
conventions (such as xxx.com) apply.
N
The following characters are invalid in a domain name:
{space} + ~ , = ‘ [ ] { } < > ’ “ ; : | \ and ?. The @ character is only
acceptable as the lead-in to the domain name (such as @folklore.net).
Edit this field as follows:
1. ClickintheMailServerDomainNameeld.Thegraphiccursorbecomesa
text cursor.
2. Edit the name as desired.
3. PresstheTabkeyonthekeyboardorclickinanothereldtoexittheMail
ServerDomainNameeld.
4. Click the Take button to make the name change take effect.