Extron Electronics MAV Plus Series Manual

A SERVICE OF

next previous

CrossPoint / MAV Matrix Switchers • Matrix Software

5-2

Matrix Software

Matrix Switchers Control Program

The Windows

®

-basedExtronMatrixSwitchersControlProgramcommunicates

withtheswitcherviatheEthernetLANport,therearpanelRemoteRS-232/RS-422

port,andthefrontpanelConguration(RS-232)port(matrixsizesupto1616)

to provide an easy way to set up ties and sets of ties. The program is compatible

withWindows2000,WindowsXP,andlater.Updatestotheseprogramscanbe

downloadedfromtheExtronWebsite(http://www.extron.com).

Installing the software

TheprogramiscontainedontheExtronSoftwareProductsCD-ROM,diskB.

Installthesoftwareasfollows:

N

For full functionality, install both of the following programs:

 • TheMatrixSwitchersControlProgram

 • TheFirmwareLoader

1. InserttheCD-ROMintothedrive.Theinstallationprogramshouldstart

automatically.Ifitdoesnotself-start,runLaunch.exefromtheCD.

 TheExtronsoftwareCDwindowappears(gure5-1).

Figure 5-1 — Software CD window

2. Click the Software tab (ﬁgure 5-1).

3. ScrolltothedesiredprogramandclickInstall(gure5-2).

Figure 5-2 — Software installation