CS-228 User Manual
22
F6: Set
[F6] allows you to configure the OSD settings for the Console you are working
at. To change a setting:
1. Double-click it; or move the highlight bar to it, then press [Enter]
2. Press [Esc] to activate it.
After you select an item, a submenu with further choices appears. To make a
selection, either double-click it; or move the highlight bar to it, then press
[Enter]. An icon appears before the selected choice to indicate which one it is.
The settings are explained in the table below:
(Continues on next page.)
Setting Function
OSD ACTIVATING
HOTKEY
Selects which Hotkey activates the OSD function: [Ctrl] [Ctrl]
(the default) or [Scroll Lock] [Scroll Lock]. The Scroll Lock
option is provided in case the Ctrl key combination conflicts
with programs running on the computers.
CHANNEL DISPLAY
MODE
Selects how the Port ID is displayed: the Port Number plus
the Name (PN + NAME); the Port Number alone (PN); or the
Name alone (NAME).
CHANNEL DISPLAY
DURATION
Determines how long a Port ID displays for after a port
change has taken place. The choices are: User Defined -
which lets you select the amount of time that the Port ID
displays for after a port change has taken place (from 1–255
sec.); and Display Always On - which displays the Port ID at
all times. If you select User Defined, key in the number of
seconds, then press [Enter]. The default is 3 Seconds.
CHANNEL DISPLAY
POSITION
Allows you to position where the Port ID appears on the screen.
Highlight this item, then press [Enter]; use the Mouse or the
Arrow Keys to position the Port ID display, then Double Click or
press [Enter] to lock the position and return to the Set submenu.