4. OSD Operation
21
F5: ADM
F5 allows an Administrator to configure the OSD operation of the Console. To
change a setting double-click it; or use the up and down arrow keys to move
the highlight bar to it then press [Enter].
After you select an item, a submenu with further choices for you to select from
appears. Double-click the choice you want, or move the highlight bar to then
press [Enter]. An icon appears before the selected choice so that you know
which one it is. The settings are explained in the following table:
Setting Function
SET ACCESS
TIMEOUT
This function is used to set the timeout value to control the
release of access rights to a computer. If the original Console
doesn?t access the computer before the timeout value is
reached, the computer becomes available to the other
Console. To set the timeout value, key in a number from 1 -
255 seconds, and then press [Enter]. If the number is 0, this
function is disabled. The default is 2 seconds.
CLEAR THE NAME
LIST
This function clears the port name list.
RESTORE DEFAULT
VALUES
This function is used to undo all Administrator changes and
return the setup to the original factory default settings except
for the Names that were assigned to Ports, which are saved.
RELEASE ALL
PRIVATE
Releases all Ports that have been set to Private Mode (see
PRIVATE MODE, page 23), so that they become accessible
to all Consoles.
