CS-228 User Manual
6
Rear Panel
No. Component Description
1 Power Switch This is a standard rocker switch that powers the unit On
and Off.
2 Power Jack The power adapater cable plugs in here.
3 Console 2 KVM
Section
The microphone, speakers, monitor, keyboard and mouse
that belong to Console 2 plug in here.
4 Console 1 KVM
Section
The microphone, speakers, monitor, keyboard and mouse
that belong to Console 1 plug in here.
5 KVM Port
Section
Use KVM Cable sets (see Either a 6-pin mini-DIN (PS/2
style) keyboard port with +5V DC on pin 4 and Ground on
pin 3, or a 5-pin DIN (AT style) keyboard port with +5V DC
on pin 5 and ground on pin 4, page 3), to connect
computers or cascade additional KVM switches (see Two
Stage Installation, page 11) to any available port.
