4. OSD Operation
19
F3: LIST
This function lets you broaden or narrow the scope of which ports the OSD
lists. This will be different for each Console, depending on the choices made
for that Console. The choices and their meanings are given in the table, below:
Double-click the choice you want, or move the Highlight Bar to it then press
[Enter]. An icon appears before the choice to indicate that it is the currently
selected one.
Note: 1. You can access any port on any list by double-clicking it, or using the
navigation keys then pressing [Enter].
2. If you select a port that does not have a computer attached to it, or if
the attached computer is powered Off, the OSD will still switch to it,
and will not show an error. To recover, press the OSD Activation
Hotkey (see OSD Overview, page 15).
Choice Meaning
ALL Lists the Port Numbers and Names (if names have been
specified - see F2: EDIT, page 18), of all the ports on the
installation.
QVIEW Lists only the ports that have been selected for Quick View
scanning (see F7: QV, page 24).
POWERED ON Lists only the ports that have their attached computers
Powered On.
POWERED ON +
QVIEW
Lists only the ports that have been selected for Quick View
scanning (see F4: SCAN, page 20), and that have their
attached computers Powered On.
QVIEW + NAME Lists only the ports that have been selected for Quick View
scanning (see F7: QV, page 24), and have been assigned
names (see F2: EDIT, page 18).
NAME Lists only the ports that have been assigned names (see F2:
EDIT, page 18).
