A SERVICE OF

logo

7
Chapter 2
Hardware Setup
Stacking and Mounting
The CS-228 can be placed on the desktop or it can be rack mounted, as
described in the sections that follow.
Stacking
The unit comes with the stacking brackets already attached. Note that there is
a top and bottom half to each bracket. The top half has a convex surface; the
bottom half has a concave surface. Line up the four bottom brackets of the top
unit with the four top brackets of the bottom unit; then fit the top unit down
onto the bottom unit.
1. Important safety information regarding the placement of this
device is provided on page 25. Please review it before proceeding.
2. Make sure that power to all the devices you will be connecting up
have been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.