Filter
Top Products
PSR-S970/S770 Owner’s Manual 99
Connections – Using Your Instrument with Other Devices –
10
By connecting an external monitor to the [RGB OUT] terminal of the instrument,
you can have the lyrics, text and display of the instrument’s LCD shown on the
monitor.
1 Call up the operation display.
[FUNCTION]
TAB [
E
] MENU 1
[J] UTILITY
TAB [
E
][
F
] CONFIG
2
2 Use the [A]/[B] buttons to select “1 SPEAKER/DISPLAY OUT.”
3 Press the [5 ]/[6 ] buttons to select the display contents.
When you select “LYRICS/TEXT,” the connected monitor shows the LYRICS
or TEXT display regardless of what is shown on the instrument’s LCD. When
you select “LCD,” the monitor shows the same contents as shown on the
instrument’s LCD.
You can connect a microphone or guitar to the [MIC/GUITAR INPUT] jack (standard 1/4” phone jack). For instruc-
tions, refer to page 88.
Connecting an External Monitor ([RGB OUT] terminal) (PSR-S970)
CAUTION
Avoid looking at the television or
video monitor for prolonged peri-
ods of time since doing so could
damage your eyesight. Take fre-
quent breaks and focus your eyes
on distant objects to avoid eye-
strain.
Mini D-Sub
15-pin
Selecting Display Contents for the External Monitor
NOTE
If the display is not aligned properly in
the external monitor, change the set-
tings on the monitor itself.
Connecting a Microphone or Guitar ([MIC/GUITAR INPUT] jack)
12psrs970_en_om.book Page 99 Friday, June 26, 2015 3:33 PM