PSR-S970/S770 Owner’s Manual 87
Registration Memory – Saving and Recalling Custom Panel Setups –
7
The saved Registration Memory Bank files can be recalled by using the REGIST
BANK [-]/[+] buttons or the following procedure.
1 Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the REGISTRATION BANK Selection display.
2 Press one of the [A] – [J] buttons to select a Bank.
You can also use the REGIST BANK [-]/[+] buttons, or the Data dial and the
[ENTER] button to select a Bank.
3 Press one of the green-lit numbered buttons ([1] – [8]) in the
Registration Memory section.
Recalling a Registered Panel Setup
NOTE
• When recalling the setups including
file selection of Song, Style, text,
etc. from a USB flash drive, make
sure that the appropriate USB flash
drive including the registered Song/
Style is connected into the [USB TO
DEVICE] terminal.
• Before using a USB flash drive, be
sure to read “Connecting USB
Devices” on page 100.
NOTE
Turning the [FREEZE] button on lets
you disable recall of specific item(s) as
desired. For instructions, refer to the
Reference Manual on the website.
Confirming the Registration Memory Information
In the REGISTRATION BANK Selection display, press the [6 ] (INFO)
button to call up the Information window, showing which Voices and Style are
memorized to the [1] – [8] buttons of a Registration Memory Bank.
NOTE
Make sure that MENU 1 is shown at the bottom right corner of the display (page 26).
NOTE
If a Voice name is shown in gray, this indicates that the corresponding Voice part is turned off when pressing
the REGISTRATION MEMORY [1] – [8] buttons.
To close the window, press the [F] (CLOSE) button.
Advanced Features
Refer to the Reference Manual on the website, Chapter 7.
Disabling recall of specific items (Freeze):
[FUNCTION] TAB [E] MENU 1 [C] REGIST
SEQUENCE/FREEZE TAB [F] FREEZE
Calling up Registration
Memory numbers in order (Registration
Sequence):
[FUNCTION] TAB [E] MENU 1 [C] REGIST
SEQUENCE/FREEZE TAB [E] REGISTRATION
SEQUENCE
12psrs970_en_om.book Page 87 Friday, June 26, 2015 3:33 PM