Sterling 682.88107.00 Model Vehicle User Manual


 
Upright Portable Hot Oil TCUs Chapter 7: Appendix 39
Chapter 7: Appendix
7-1 Optional Components
The following is a list of options which your portable hot oil tcu may have been equipped
with:
Drain valve
Hour meter; measures total pump run time hours
General fault visual alarm
Autovent sequence; deducts available
Low level alarm; deducts available
High level indicator light
Manual bypass; deducts available
M2B+ microprocessor controller options include:
4-20 mA remote set point and retransmission
SPI protocol, RS-485
General protocols, types RS-232, -485
Remote sensor; 10 Ft. (3m)
Heat exchanger options of 3.9 sq. ft. (0.3627 sq. m) and 6.7 sq. ft. (0.6231 sq. m)
Remote controller
Lexan cover
Optional operating voltages of 208/3/60, 230/3/60, 575/3/60, 380/3/50, and 415/3/50