Filter
Top Products
6
➀
Mode Keys
Use these keys to program the remote
control and to select the operating
mode (VCR, TV, or AUX).
➁
Input Key
Press to select the program source to
be displayed on the screen: TV signal
or signal from the equipment you have
connected to the A/V jacks.
➂
Number Keys
Two keys must be pressed to select a
channel. Example: Press 0 then 6 to
select channel 6. F
or cable channels
100 through 125, press and hold the
1 key until C1–– appears. Then press
the other two numbers.
➃
Caption Key (See page 16.)
➄
Menu Key
Use this key with the / and
/ keys to navigate and adjust
features of the on-screen menu system
(see pages 9 ~ 10).
➅
Channel (CH) Scanning ( / )
and Volume ( / ) Keys
Press to scan through the channels in
memory and to adjust the volume.
➆
Mute Key
Press once to minimize the volume.
Press again to restore.
Note: When using the audio out jacks
this key will not mute the sound.
➇
VCR/DVD Keys
These keys control VCR and/or DVD
functions for Fast Forward ( ),
Rewind ( ), Play ( ), Record
( ), Stop ( ), and Pause ( ).
➈
V-Guide Key (See pages 13 ~ 15.)
➉
Reset Key
Press this key twice to restore factory
settings. The TV will automatically
start Channel Search and clear all cus-
tomized settings. (See page 10.)
Power Key
Press to turn TV on or off.
Sleep Key
Use this key with the “0” key to set the
Sleep Timer (see page 15).
Recall Key
Select a channel then select another
channel using the number keys. Press
Recall to switch between the channels.
Display Key
Press once to display the channel
number. Press twice to display the
channel number continuously. Press
again to remove the display.
Point towards TV
11
12
13
QuickTips
■
Make sure batteries
have been installed
correctly.
■
If the remote control
does not work: Press
TV key (see item 1).
■
The remote control
must be programmed
before it will operate
your VCR, DVD, or
Cable Box. See
pages 7~8.
■
Cannot select channel
with number keys.
Press “0” in front of
numbers 1 ~ 9.
Example: Channel 05.
■
The “C” in front of the
channel number indi-
cates a Cable channel.
■
Adjusting the volume
level: Right flashing
arrow indicates
volume is increasing
and left flashing arrow
indicates volume is
decreasing.
■
Channel number con-
tinuous display mode
is not available when
captioning is on.
■
Using V-Guide TV
Parental Guidelines
settings can be
changed only by using
the Remote Control.
See pages 14 ~ 15.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
UNIVERSAL/MULTIMEDIA REMOTE CONTROL KEYS
14
➀
➁
➂
➃
➄
➇
➅
➈
➆
➉
12
13
14
11
➠
➄
Menu Key
Use this key with the / and
/ keys to navigate and adjust
features of the on-screen menu system
(see pages 9 ~ 10).
➅
Channel (CH) Scanning ( / )
and Volume ( / ) Keys
Press to scan through the channels in
memory and to adjust the volume.
➆
Mute Key
Press once to minimize the volume.
Point towards TV
QuickTips
■
Make sure batteries
have been installed
correctly.
■
If the remote control
does not work: Press
TV key (see item 1).
■
The remote control
must be programmed
before it will operate
your VCR, DVD, or
Cable Box. See
78
UNIVERSAL/MULTIMEDIA REMOTE CONTROL KEYS
➀
➁
➂
➉
11
➠