Filter
Top Products
12
Global Mode
In Global Mode you make adjustments to how the
Conspiracy will operate. The changes made in
the Global mode are for the overall settings of the
controller. To access the Global Mode, press the DATA
knob to enter the Menu, rotate the DATA knob until
the screen reads: 3.GLOBAL MODE, and press the DATA
knob or PLAY/ENTER button. Rotate the DATA knob to
recall the different functions in Global Mode.
1. MIDI RESET
During a performance, if a note is stuck on, the MIDI reset will send a panic command
to all ports and channels of external sound, causing the device to terminate the sound.
To execute the MIDI RESET:
1. From the GLOBAL MODE rotate the Data knob to select 1.MIDI RESET.
2. Press the Data knob or PLAY/ENTER button to access the MIDI RESET function.
3. Press the Data knob or PLAY/ENTER button to transmit the reset message.
2. Global Channel
The Global Channel is the master MIDI channel for transmission and reception. Any or
all of the controls can be set to a specific MIDI channel or to the Global Channel within
the Edit Mode. If a control is set to the Global Channel it will transmit information on
the assigned Global Channel. To change the Global Channel:
1. From the GLOBAL MODE rotate the Data knob to select 2.GLOBAL CHANNEL.
2. Press the Data knob or PLAY/ENTER button to access the Global Channel function.
3. Rotate the Data knob to select the desired Global MIDI Channel.
4. Press the Data knob or PLAY/ENTER button to set the Global MIDI Channel.
3. Pad Sensitivity
The Pad Sensitivity adjusts how the sensitive the pads when pressed. Setting the Pad
Sensitivity to HEAVY allows you to hit the pad harder to achieve a higher velocity.
Setting the Pad Sensitivity to LIGHT allows you to hit the pad lighter and still output a
high velocity, this is useful if you want a consistent velocity from the pads even if you
hit the pads softly. To adjust the Pad Sensitivity:
1. From the GLOBAL MODE rotate the Data knob to select 3.PAD SENSITIVITY.
2. Press the Data knob or PLAY/ENTER button to access the Pad Sensitivity function.
3. Rotate the Data knob to select the desired Pad Sensitivity setting.
4. Press the Data knob or PLAY/ENTER button to set the Pad Sensitivity.
To cancel any selection, press
the STOP/CANCEL button.
To exit the menus and return to
the Performance mode, press
the RECORD/EXIT button. This
will also cancel any changes
not confirmed.