Filter
Top Products
10
Edit Mode
Edit Mode enables you to modify to how the pads, knobs, faders, buttons and X/Y touch
pad operate. In the Edit Mode, the Conspiracy will stop transmitting MIDI data, and you
can make adjustments to the current preset settings.
To access the Edit Mode:
1. Press the DATA knob to enter the Menu
2. Rotate the DATA knob until the screen reads:
2.EDIT MODE, and press the DATA knob or PLAY/
ENTER button. The display will read: 1.SELECT
CONTROL.
3. Press or move a controller to select the controller
to modify, and press the DATA knob to access the
editable parameters.
4. Rotate the DATA knob to navigate between parameters.
5. Press the DATA knob or PLAY/ENTER button to access a parameter.
6. Rotate the DATA knob to adjust a parameter.
7. Press the DATA knob or the PLAY button to accept the change.
Once a control has been selected:
To cancel a selection, press the STOP/CANCEL button.
To exit the Edit mode and return to the Performance mode, press the RECORD/EXIT
button. This will also cancel any changes not confirmed.
To exit the Edit Mode, rotate
the Data knob until the screen
reads:
EDIT MODE:
2.EDIT EXIT
Press the Data knob to confirm