Razor 300001-SL Riding Toy User Manual


 
BEFORE YOU BEGIN
2
WARNING:
DO NOT USE NON-RAZOR
PARTS WITH YOUR
GROUND FORCE.
The Ground Force has been built to
certain Razor design specifications.
The original equipment supplied
at the time of sale was selected
on the basis of its compatibility
with the frame and all other parts.
Certain aftermarket components
may not be compatible. Use of non-
Razor parts will void the warranty.
WARNING: Turn power
switch off before conducting any
maintenance procedures.
q Required Tools
(2) 5mm Allen wrench
3mm Allen wrench
(included)
8/10/19mm wrench
(not included)
13/17mm wrench
(not included)
Screwdriver
(not included)
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Remove contents from box. Remove the foam separators that protect the components from damage during
shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have
occurred during shipping. Because the Ground Force was 95 percent assembled and packed at the factory,
there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult.
Allow up to 45 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 5 for charging information).
Speed Control / Thumb Throttle
Steering Wheel
Wheel
Charger Port
Tie Rod
Brake Adjustment
(Auxiliary)
Chain Adjuster
Brake Lever
Charger
Plug
Charger
Port
On/Off Switch
Charger
(Note: Charger design may
vary from one shown)