Filter
Top Products
34
Appendix
Maintenance
Cleaning the projector
Unplug the power cord before cleaning the projector.
Avoid using benzene or thinners, as these can damage the finish on the cabinet and operation panel.
Do not use volatile agents, such as insecticides, on the projector.
Do not leave rubber or plastic objects in contact with the projector for long periods, as they may damage
the finish of the projector.
Wipe off dirt gently with a soft flannel cloth.
For hard-to-remove dirt, soak a cloth in a neutral detergent diluted with water, wring the cloth well and then
wipe the projector.
Strong cleaning detergents may discolor, warp or damage the coating on the projector. Make sure to test
on a small, inconspicuous area on the projector before use.
Cleaning the lens
Use a commercially available blower or lens cleaning paper (for glasses and camera lenses) for cleaning
the lens. Do not use any liquid cleaning agents, as they may wear off the coating film on the surface of the
lens.
The surface of the lens is easily damaged, do not to scrape or hit the lens.
S
OURCE
M
E
NU
ENTER
SOURCE
M
ENU
EN
TER
SOUR
C
E
M
E
NU
ENTE
R