Filter
Top Products
ENGLISH 11
Replacing the small Parent Unit’s battery pack
1 Open the small Parent Unit’s battery compartment cover (29).
2 Disconnect the old battery pack from the power plug and remove.
3 Carefully connect the new battery pack to the power plug and place
inside the battery compartment.
4 Close battery compartment cover (29).
• Remove the battery-pack from the Parent Unit if it is not used for long
periods of time.
Batteries
Dispose of used batteries in an environmentally friendly manner.
Do not mix old and new batteries, or different types of batteries.
Remove Baby Unit batteries if the baby monitor is not to be used for long
periods.
Technical specifications
Power supply: – Battery pack; rechargeable NiMH for small
Parent Unit (included).
– Optional batteries 4x 1.5V; AA for Baby Unit
and big Parent Unit (not included)
– AC power adapter 230V AC, 50 Hz (three
included): - Output voltage 9V DC, 200mA.
Operating range: Up to 200 metres in ideal conditions (walls,
floors, etc. can limit this distance).
Operating temperature: 10 °C to 40 °C
Digital pilot tone: Continuous communication link (hidden
signal helps reduce interference and ensures
a continuous link between both units so you
only hear your baby’s sounds).
Transmission SBC SC450/00/05/84:
frequencies from 40.695 to 40.675 MHz