Filter
Top Products
⇠
1• To refit the padding:
• Position on the seat.
• Insert the four fixing tabs along the
edge of the car seat.
• Position the two car seat belt side
guide protectors with the openings
facing towards the car seat and
check that they are correctly
engaged.
2• To refit the safety harness:
Important! when fitted (as
described in section 3), it must not
be twisted.
• From the front of the car seat insert
the safety harness shoulder straps
into the shoulder slots and then
attach them to the metal buckle at
the rear of the car seat.
• Insert the two safety harness side
buckles and the central buckle of
the leg divider strap into their slots
and replace the two plastic covers.
44
How to Wash the Chair Padding - Refitting
PrimoViaggioSIP-ES_USA_30-30_FIU44 44 10-03-2010 14:45:09