Filter
Top Products
⇠ 15
A
PUSH
B
A
PUSH
B
3
•
Remove the two anchor latches from
their housings. The latches are on
the sides of the base. First loosen
the latch strap by pressing on the
gray button and pulling the strap as
shown. Then press the red button
on top of the latch and pull the latch
out of its housing. Repeat on other
side.
4
•
Push each latch onto the anchor bar
located between your vehicle seat
back and seat bottom. Press until
you hear the click.
PrimoViaggioSIP-ES_USA_30-30_FIU15 15 10-03-2010 14:44:50