Filter
Top Products
⇠ 19
Installing the Base with Different Types of Seat Belts
Primo Viaggio Sip ES 30•30 is designed
for use with lap or lap/shoulder seat belts.
Four of the most common types are listed
below. Please read your vehicle manual
for instructions on installing an infant car
seat using your vehicle seat belts.
I Lap/Shoulder belt with
Switchable Locking Retractor
If your vehicle has Switchable
Locking Retractor lap/shoulder belts,
pull the shoulder strap all the way
out, let it retract several inches, then
pull it out again. It should lock in
place to properly secure the base.
II Lap/Shoulder belt with
Emergency Locking Retractor
(ELR) and free sliding latch plate
This type of seat belt will only lock in
an emergency, so you must use the
locking clip (stored on infant seat
base) to properly secure this type of
seat belt (see page 21).
PrimoViaggioSIP-ES_USA_30-30_FIU19 19 10-03-2010 14:44:52