Filter
Top Products
10 FAuLT FINDING
6 Customer Support
Should you experience difficulties operating the SC700
please refer to the problems and solutions guide below.
If you still experience difficulties please contact Oricom
Customer Support on 1300 889 785 for assistance.
Problems and solutions
Problems Solutions
Equipment does
not function
− Baby unit and/or parent unit are not
switched on.
− The batteri es are empty or
defective.
− The power adapter plugs are not
connected.
No reception − Baby unit and parent unit are not
registered.
− The parent unit and baby unit are
too far apart.
− The VOX sensitivity is set too low.
R e c e p t i o n
interference
− The parent unit and baby unit are
too far apart.
− The battery power is too low.
− Other electronic devices are
causing interference in the field of
transmission.
Beeping noise
( a c o u s t i c
feedback)
− Increase the distance between
parent unit and baby unit.
− Reduce the volume on the parent
unit.
Noise − The battery power is too low.
Picture but no
sound
transmission
− Volume setting is too low.
P ic t u re is in
b l a c k a n d
white
− The night vision function is active.
The battery pack
in the
parent unit is not
charged
− The power adapter plug is not
connected.