Filter
Top Products
pACK CONTENTS 9
or a button on the parent unit is pressed.
1
VOX: Voice Operated Transmission = Sound detection
Selecting a lullaby
Press the button on the right hand side of the parent
unit.
This icon appears in the display.
Use the button to select one of the 5 lullabies (1-5).
If no number is displayed, all of the lullabies will
continue to play in sucession until deactivated.
Use this button to adjust the volume to one of five
settings. The volume levels will be adjusted on both
the baby unit and parent unit simultaneously.
This icon appears during the volume adjustment.
Intercom function
Press and hold the button.
This icon appears in the display.
Speak into the microphone to talk with the person
near the other unit.
While talking, any lullabies playing are muted.
Range
This icon flashes in the display when the distance
between the baby unit and parent unit is too great.
Move the parent unit nearer to the baby unit.
Registration
The parent unit and baby unit are pre−registered.
If necessary, registration can also be completed
manually:
Baby unit/Parent unit
1 Switch the baby unit off. Switch set to OFF.
2 Cover the light sensor with a black cloth and switch
the baby unit on. Position ON.
3 With the parent unit switched on press and hold
this button on the parent unit for a few seconds.
C1
4 This icon appears in the display.
5 The Power LED on the baby unit flashes quickly
for approx. 15 seconds.
6 Press this button to conrm the selection.
7 C1.... appears initially, then C1....OK.
When a connection is established, the image viewed
by the lens appears in the display.
If C1...X appears (registration failed), it may be
necessary to remove the power and remove the
batteries from the baby unit for a few seconds.