23
)FTHE0ARENTUNITRECEIVESSOUNDUPTOTHELEVELOFTHElRSTTWO,%$STHENTHEY
WILLTURNAMBERBUTNOSOUNDWILLBEHEARDIFTHESOUNDRISESABOVETHISLEVEL
then the unit will un-mute so you can hear the sounds.
1. To switch Mute Low on, press the
button located on the top of the Parent
unit. The Mute indicator will turn amber.
2.
To switch Mute Low off, press the button again. The amber indicator will switch off.
Once the Mute Low sound threshold has been exceeded, baby sounds will be able to be heard for a
FURTHERSIXSECONDSEVENIFTHEYDONOTREACHTHE-UTE,OWTHRESHOLD
Talk Back
9OUCANUSETHE0ARENTUNIT4ALK"ACKFEATUREASAONEWAYINTERCOMTOCOMFORT
and reassure your baby. By speaking into the Parent unit your baby will hear
YOURVOICEFROMTHE"ABYUNIT0LEASENOTETHATWHENUSING4ALK"ACKYOUWILL
not be able to hear your baby until you release the button.
1. Press and hold down the
button on the Parent unit to speak to your baby.
Whilst the button is depressed the display will show Talk and the green
Link indicators will flash on both units.
Talk Back
9OUWILLBEABLETOACTIVATE4ALK"ACKMODEEVENIFOTHERFUNCTIONSHAVEBEENACTIVATEDATTHE"ABYUNIT
like Music playback or Nightlight on.
Press
or TOADJUSTTHE4ALK"ACKVOLUMELEVELOFTHE"ABYUNITLOUDSPEAKER
$ONOTPRESSTHE
button when the Baby unit and Parent unit are positioned in the same room.
High-pitch noise will be generated if the
button is pressed when Baby unit and Parent unit are
close to each other or within 3 metres distance.
When using Talk Back, hold the Parent unit approximately 30cm in front of your mouth when talking to baby.
USING YOUR DIGITAL BABY MONITOR