Filter
Top Products
NetComm NB5PLUS4 QuickStart Guide for Mac
p 6
16. If your Mac does not accept an IP address from the DHCP server in your NB5PLUS4 and the IP
address field remains blank, try selecting “Using DHCP with manual address” from the
“Configure” pop-up menu (“Configure iPV4” if you’re using Mac OS 10.3) and entering
192.168.1.3 in the “IP address” field.
17. Click on the “Show” pop-up menu and select “Network Status”. Check to see that the bullet
alongside “Ethernet Adaptor (en2)” is green.
18. Close the Network window by clicking the red close button (System 10.3) or select “Quit
System Preferences” under the “System Preferences” menu (System 10.2 or earlier).