Filter
Top Products
– 54 –
Argument Description
arg1 -cons Sets a consistency check schedule.
Other arg parameters are used to set time. If no other
arg parameters are specified, relevant default is used.
-h Sets the start time of the consistency check. The time
can be set in the range from 0 to 23. (The default start
time is 0.)
-d Sets the day of the week on which the consistency
check is made in the range from 0 to 6. (The default
day is 0 (Sunday).)
-w Sets intervals of 0 to 24 weeks at which the
consistency check is made. -w0 indicates that the
consistency check is made every day. (The default
interval is 1 week.)
-dateMM/DD/YYYY Sets the start date of the consistency check. (The
default start date is the command execution date.)
YYYY ranges from 1900 to 2038. (A year over 2038
cannot be specified.)
arg2 to
argi
-abort Terminates the consistency check if it is in progress.
-enChkCon Executes the consistency check command at the
scheduled time. (Default)
argi
-disChkCon Suppresses the consistency check at the scheduled
time. This suppression does not affect the current
consistency check. If -disChkCon is specified with
-enChkCon, the last-specified one is valid.
Examples of use
Executing the consistency check command at 00:00 every Sunday
megactrl -cons -h0 -d0 -w1
Terminating all the consistency checks of all controllers
megactrl -cons -abort
Disabling the consistency check schedule
megactrl -disChkCon
Enabling the consistency check schedule
megactrl -enChkCon
NOTE: The above commands need directory specification
depending on the setting of the system path.
Example: C:\winnt\system32\megactrl -cons