Filter
Top Products
– 44 –
Step 2
Select a physical drive in the
Ready status.
Click on [Add to Array]
button to assign physical
drives to the new array.
Click on [Accept Array]
button, and then click on
[Next] button.
NOTE:: Assign all physical disks used to configure a logical
disk to [New Array]. For example, to configure the array of
RAID5 level, at least three physical drives are required.
Step 3
Specify the RAID level and
size of the logical drives.
Click on [Accept] button, and
then [Next] button.
Click on [Advanced] button if
you want to set the advanced
parameter (e.g., write policy).