Filter
Top Products
– 37 –
Logical Drv Menu
Initialize
Choose this option to initialize the selected logical drive or drives. You can view the
progress of initialization. The time required for initialization depends on type and capacity
of physical drive.
IMPORTANT: Power Console Plus allows you to initialize a
drive at any time. Make sure that the drive being initialized
does not have live data. All data will be lost.
Check Consistency
Choose this option to verify the redundancy data in logical drives that use RAID levels 1
or 5.
Select the logical drive to be checked and choose [Check Consistency] from the [Logical
Drv] menu.
You are prompted to run parity checking. Click on [OK] to perform parity checking.
Parity Checking Selected Device(s)
If a discrepancy is found, it is automatically corrected. However, if the failure is a read
error on a data drive, the bad data block is reassigned with the generated data.