Filter
Top Products
Oxygen Series User Guide 6
Velocity Curve
The Velocity Curve Select key (VEL CURVE) is used to change the touch sensitivity of the keyboard. This setting lets
you decide how the force with which you hit a key affects the volume at which a note plays. Oxygen Series keyboards
provide 7 different sensitivity options:
1 = C1 is a sensitivity setting that generates lower velocity values for the same force. This setting is useful for playing
more quietly, even if you tend to strike the keys harder.
2 = C2 is the default setting, and is designed to be useful for most players with an "average" touch (people who play
with an average amount of force).
3 = C3 is a sensitivity setting that generates higher velocity values for the same force. This setting is useful for
playing more loudly, even if you tend to strike the keys with less force.
4 = C4 is a sensitivity setting that generates an equal velocity value for a given amount of force, resulting in a linear
(or neutral) keyboard response.
5 = F1 is a setting that effectively disables sensitivity, meaning the keyboard will generate a fixed velocity value of 64
(on a scale of 0-127) regardless of how hard or soft the keys are struck.
6 = F2 is a setting that effectively disables sensitivity, meaning the keyboard will generate a fixed velocity value of
100 (on a scale of 0-127) regardless of how hard or soft the keys are struck.
7 = F3 is a setting that effectively disables sensitivity, meaning the keyboard will generate a fixed velocity value of
127 (on a scale of 0-127) regardless of how hard or soft the keys are struck.
When a new Velocity Curve is selected using either method described below, the LED screen will show the first 4
Velocity curves as C1 - C4, and the three fixed velocity settings as F1 - F3.
1. Press the Advanced button
2. Press the Velocity Curve key - the LED display will show the current velocity curve (for example ".C.2")
3. Type the Velocity Curve number (1 through 7) using the number keys
4. Press the Enter key
- or -
1. Press the Advanced button
2. Press the Velocity Curve key - the LED display will show the current velocity curve (for example ".C.2")
3. Use the "
-" and "+" buttons to scroll through the Velocity Curves (C1 through F3)
4. Press the Enter key
Drawbar Mode (Oxygen 49 and 61 only)
This parameter switches all 9 Sliders to Drawbar Mode. In this mode, the operation of the sliders is reversed, so that
the maximum value (127) is at the bottom and the minimum value (0) is at the top.
This feature is intended for use with Organ presets that utilize drawbars.
1. Press the Advanced button
2. Press the Drawbar key - the LED screen will momentarily display "On"
Drawbar mode becomes active immediately and Advanced mode exits automatically
Repeat steps 1 and 2 to disable Drawbar mode. The LED screen will momentarily display "OFF"