Filter
Top Products
36
206-4258
Cloning Procedures (Cont.)
(Continued from previous page)
• If the TLX le contains an FTG Channel Map that was Learned from a TV, the physical RF
channels in the FTG Channel Map have been assigned logical channel numbers (see “Learning
Conguration from a Master TV” above). When you Teach the FTG Channel Map to the Target
TV(s), you will have the option to select either logical or physical channel tuning. If you select
physical channel tuning, the physical RF channels in the FTG Channel Map will remain in logical
order.
• If the TLX le contains an FTG Channel Map that was created in the FTG File Manager, each
logical channel number in the FTG Channel Map has been assigned a physical RF channel or an
Aux input (the latter designated by 130-0 through 137-0—see also Reference section, “TV Aux
Input Conguration”). When you Teach the FTG Channel Map to the Target TV(s), you will have
the option to select either logical or physical channel tuning. If you select physical channel tuning,
the physical RF channels and Aux inputs in the FTG Channel Map will remain in logical order.
• If the TLX le was created in the FTG File Manager, it may contain multiple zoned FTG Installer
Menu proles for different TV models. Make sure it includes the appropriate Installer Menu
prole(s) for the Target TV(s) before Teaching.
Caution: Do not unplug the TV power cord or remove/disconnect the USB memory
device while Teaching, as doing so may cause the TV to malfunction or harm the
USB device, respectively.
Teach Conguration to Target TV
1. Turn ON the Target TV.
2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you
turn ON the TV:
• If the wizard is displayed, you can complete the Teaching process via the wizard, as indicated
above (see “Before You Begin”). However, to continue with this procedure and access the
Teach to TV (TLX) option from the TV menus, exit the wizard. Then, continue with step 3.
• If the wizard is not displayed, go directly to step 3.
3. If the TV is currently in Pass-through Mode and the TLX le you are Teaching contains an
Installer Menu and/or TV Setup Menu prole with a Zone assignment, either from the Master
TV Setup or when congured in the FTG File Manager, make sure to assign the same Zone
designation in the Target TV at this time. See Reference section, “Using the TV Zoning Feature,”
for further information.
Note: In order for the proper location-specic TV Zone prole data to be applied,
the Zone designation must be assigned in the Target TV(s) BEFORE Teaching is
performed.
4. Insert the USB memory device with the TLX le into the USB port on the Target TV.
5. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in
Pass-through Mode) or the Function Menu (TV is already in FTG Mode).
6. Use the arrow navigation keys to select/highlight either the Option menu icon from the TV
setup menus or the Lock menu icon from the Function Menu. Then, press the number “7” key a
total of seven times to display the TV Manager / USB Download Menu.
(Continued on next page)