Filter
Top Products
19
206-4258
Ez Download Utility
The Ez Download utilty, available from the TV Manager / USB Download Menu, enables you to select
multiple les at one time from the les loaded on a USB memory device. You may use this utility to
download any one or all of the following to a TV: a TLX le for conguration purposes, a TV CPU or
PTC software update, a splash screen image.
Before You Begin
• Ensure the USB device has been formatted with FAT format.
• Software upgrade and splash image les must be stored in a folder named “LG_DTV” in the root
directory of the USB memory device. TLX les should simply be stored in the root directory of the
USB device.
• If the EZ-Manager Wizard appears on the screen when you turn ON the TV, you can use the
wizard’s “USB Conguration” option to access the Ez Download utility (see “TV Conguration
Options” and/or “USB Conguration” on pages 13 and 17, respectively, as necessary).
• If the TV is currently in Pass-through Mode and you intend to use the TV Zoning feature for
location-specic conguration purposes, make sure to assign the appropriate TV Zone # in the
TV when directed to do so in the procedure below.
• Refer to “Custom Master TV Setup” on pages 31 to 33 for information on creating a TLX file for
cloning purposes, and/or refer to “Creating an FTG Conguration File” on pages 38 to 39 for
information on creating an FTG Conguration (.tlx) le for FTG Mode conguration.
• See Reference section, “Downloading a Splash Screen using a USB Memory Device,” for splash
screen image guidelines.
• See Reference section, “Upgrading TV/PTC Software using a USB Memory Device,” for further
information on software upgrades.
Caution: Do not unplug the TV power cord or remove the USB memory device
during a data download, as doing so may cause the TV to malfunction or harm the
USB device, respectively.
Accessing and Using the Ez Download Utility
1. If it is not ON already, turn ON the TV.
2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you
turn ON the TV:
• If the wizard is displayed, you can complete the Ez Download via the wizard, as indicated above
(see “Before You Begin”). However, to continue with this procedure and access Ez Download
from the TV menus, exit the wizard. Then, continue with step 3.
• If the wizard is not displayed, go directly to step 3.
3. If the TV is currently in Pass-through Mode, you are transferring (Teaching) a TLX le to the TV
as part of the Ez Download, and you intend to use the TV Zoning feature, assign the appropriate
TV Zone # in the TV at this time. See Reference section, “Using the TV Zoning Feature,” for
further information.
Note: In order for the proper location-specic TV Zone prole data to be applied,
the Zone designation must be assigned in the Target TV(s) BEFORE you continue
with Ez Download.
(Continued on next page)