Filter
Top Products
SECTION 6—FRONT RIGGINGS
Part No 1143195 23 Van Seat
Adjusting the Height of the Center Mount Footrest
ƽ WARNING
While the wheelchair is moving, minimum ground clearance for the front rigging is
three inches. If the wheelchair is not moving, the front rigging MUST maintain a
minimum of one inch ground clearance - otherwise personal injury and damage may
result.
NOTE:Forthisprocedure,refertoFIGURE 6.8.
1. Removethetwomountingscrewsthatsecurethefootrestextensiontubetothe
extensiontubehousing.
2. Adjustthefootrestextensiontubetothedesiredheightandalignthecorresponding
holestothemountingholesontheextensiontubehousing.
3. Reinstallthetwomountingscrewstosecurethefootrestextensiontubetothe
extensiontubehousing.Securelytighten.
4. RepeatSTEPS1‐3fortheotherextensiontube.
FIGURE 6.8 Adjusting the Height of the Center Mount Footrest
Seat Frame
Extension
Housing
Extension Tube
Height Adjustment
Holes
Mounting Screws
Extension Tube Mounting Holes
NOTE:ReleaseLever
locatedtowardsthefrontor
centerofseatframe.