Filter
Top Products
Installation
16 309572ZAF
6. For non-RTD hoses only, connect cables
(4). Slide insulator sleeves (S) over con-
nection. Leave slack in cables as stress
relief to prevent cable failure.
7. For RTD 2-component hoses only, connect
RTD cables (4) and CAN cables (5) if pres-
ent.
8. Repeat for additional hoses.
9. See Connect FTS and Heated Dual Whip
Hose, page 18, or Connect FTS with a
Non-Heated Whip Hose or Remote Mix
Manifold, page 20.
F
IG. 11
F
IG. 12
TI2683B
S
4
TI18358a
5
4