Installation
12 309572ZAF
Connect Whip Hose to Gun or Gun Manifold
1. Overlap A and B component hoses and
assemble to gun or gun manifold fittings as
shown in F
IG. 1.
2. Tighten fittings to A and B component
hoses. Ensure hose remains flat after fit-
tings are tightened. Loosen and retighten
fittings as necessary to eliminate any
torque on hoses. This will help achieve a
flat profile on the hose.
Install hose in a helix configuration for:
• Easy gun movement
• Large spraying motion
• Ability to spray in tight areas and odd angles
• Reduced operator fatigue
• Maximum hose life
F
IG. 1
Tighten
Tighten
Tighten
TI12158a TI14721a