Filter
Top Products
8
Free End
Anchored End
Free End
Anchored End
LOOSEN
TIGHTEN
To tighten the belts:
• Feed the anchored end of the restraint belt up through the buckle
to form a loop
A
. Pull the free end of the restraint belt
B
.
To loosen the belts:
• Feed the free end of the restraint belt up through the buckle to
form a loop
A
. Enlarge the loop by pulling on the end of the
loop toward the buckle. Pull the anchored end of the restraint
belt to shorten the free end of the restraint belt
B
.
4
• Slide the power switch to the on position for calming
vibrations. Slide the power switch to the off position to turn
vibrations off.
6
Power Switch
Toy Bar
• Fit the plugs on each end of the toy bar into the sockets in each
side rail.
• Use the toy bar only in infant mode.
• To remove the toy bar, press the tabs on the toy bar plugs and lift.
5
Infant - Recline Toddler - Upright
• Insert the waist restraint belts back through the small slots in
the pad.
• Insert the restraint pad down through the large slot in the pad.
• From the back of the pad, buckle the waist belts to the restraint
pad. Tuck the free ends of the waist belts into the openings in
the pad.
Seat Position
• Fasten the straps on the back of the pad for the
Toddler-Upright Position.
Large Slot
Small Slot
2
1
BACK VIEW
BACK VIEW
3