Filter
Top Products
3
Parts
Seat Back Tube
Toy Bar
2 Side Rails
Back Crossbar
2 Retainers with Lock Nut
Front Crossbar
Pad
IMPORTANT! Please remove all parts from the package and
identify them before assembly. Some parts may be packed
in the pad.
Kickstand
Note: Tighten or loosen all screws with a Phillips screwdriver.
Do not over-tighten the screws.
Shown Actual Size
M5 x 30 mm Screw – 6
Assembly
• Fit the ends of the seat back tube to the ends of each side rail.
Hint: The seat back tube is designed to fi t one way. If it does not
seem to fi t, turn it around and try again.
• While pressing the button on the end of the seat back tube/side
rail, continue to insert until the buttons “click” into place.
Make sure you hear a “click” on each side.
• Pull the seat back tube to be sure it is secure on the side rails.
IMPORTANT! Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken. Contact
Fisher-Price
®
for replacement parts and instructions if needed.
Never substitute parts.
Seat Back Tube
PRESS
PRESS
Side Rails
1
CAUTION
This package contains small parts
in its unassembled state.
Adult assembly is required.